PAPER JET FIGHTER – How to make a paper airplane that FLIES | Eurofighter

Google+ Pinterest LinkedIn Tumblr

One two and on this tutorial I will show you guys how to make one of my best paper and pen the eurofighter typhoon. So let’s stand up to make the typhoon your nail printing paper, okay and using letter size. So if you have a foam paper should follow a link on the description and just print it out, trim it to letter size first step of photo paper in half like this next step and start from this edge forth to this edge all right, and then I Repeat the same step for the other side. Yes, I turn the paper over open your paper and turn it over like this. Now I can match this grease to this crease, and I can use this in degrees. Here is my car light to. Fourth, down must show that before this life – and you create this crease across the intersection of all creases here and then turn the paper over like this. Now I can fold this crease to the center crease. Then I do the same step for the left side or the other side, and now this is what I have just for this part of the paper, though now we just have like a house chambray show that everything next step. I will start from the tip here before to this th. The reason for that is to create a crease. Thus we use later edges for this part out to create crease. Here that’s introduced later for order form and then now I will estimate about 3/4 inch from this corner around this edge. Let’S just fall straight up to the 40. I can show you 3/4 of an inch or half over the reason. Why, for this part of the paper is to create strong links that you can use later and now I can fold this layer back to this size. Okay, then just fold the paper in half it is so. This is what we have so far right. They can turn the paper over ideas just for this layer back here then. Now, when I fold this part, you can see the edge here. I will use this reference to fold the other side just for slowly. Alright. Now it did fold this layer back here and turn the paper over. So this is what we have so far now I will step from this corner I’ll use the center crease here it’s my preference like to fold this up to the corner and then repeat the same step for the other side, just for strim just straight up there. Now, Foley strangle to a sign here, you go next step, start from this edge point to the center crease right. Okay, then repeat the same step for the other side right just fold. This triangle shipper here, put the strangle ship to this size and step on this edge fold it to the center crease right and just fold this triangle back, let’s just fold this triangle, ship back to the other side as well: okay, now we’re creating the wind. Okay, remember that we did fold out to create a crease, and now you can see the Creasy okay. This is very subtle, but we can still use this as a preference. I just for this one down we’ll start from the crease now for straight down to this corner, all right, let’s Foley strangle ship to the other size for this to do the other side, and then you can fold the paper in half like this again and now You can use this edge as a reference to fold this layer out. Okay. Now I look for the paper. Letters. Okay then turn the paper over put it down. It’S just for the stranger shifted to the right side: okay and the next step from this quantum or for straight out to this corner turn the paper this way. So it will be easy to fall straight down. Here then repeat the same step for the other side see this is perfect right. Okay, then it’s just for this trick. Whole triangle shape to assign ton of paper. This way again, this will be easier to form. Then I would just fold this edge straight to the center crease. Make sure that this part of the paper will pop up. Okay, did I put that and just flow this one? Then, when you fall out, you can fold this part of the paper now to create a panel. Let s see how I did make sure. There’S this taste a little bit less, then we put the same step for the other side. The best way is to turn the paper over like this and then just fold, this layer or triangle ship to a size. Okay, they just fold it to the center crease. When you fold to this in the crease, you can use the edge of the other side. Use your preference or guideline to for me, okay, perfect, and now you have this pop-up. You can use the panel of the other size as your preference to fold this one. You need to fix it a little bit too much make sure that it’s match say a little bit off, so you need to fold this one a little bit. Okay, so nice, it’s really good the pin our match just for it to the side. The problem now is that this one isn’t look like this one, so we have to fix a little bit so how to fold this part up later with letters. So what I have it so now we fixed the pen. Oh, this is very good. We’Ll put a paper down and flatten it with it. Okay, so you just finished the most difficult step. Now we just start from this crease remember the crease we create earlier okay, and I will estimate about 1/2 inch from this corner along this end to make a marking. Now it is four letters ahead for this it. This is also a difficult step. It should fall astray from the screen to the remark which is making, and that is all right now we fold this part of the paper up and just make them to hold the other size of the paper for the players. I should, as this edge will match with the other edge of the words, then you will be fine for this. They also need to fix the pen a little bit to adapt in hours. Not much have to fold this one up a little bit take the pen on. Let’S see how for this, they just for this one day, this one pop up push it down again, okay, now, this is what we have right. I put a paper, though. Now we step from the edge here. Yes, you go here and we’ll for it to visit just for slowly. You need to force a little bit more and then, when we pick the same step for the other size, and then I will repeat the same step for the other side, we’ll turn the paper over letters. Okay, the easiest way is to make this edge to this edge, which this first perfect legit for this one. Okay, now open the paper. This is what you should have for now. This step is a difficult step. We need to pretty stabilizers, so you can see this part of the paper right edges hard like this, then just fold this one up see. I always liked it for a political will for straight up make sure that these this size of the stabilizer will go straight down to this. This part of the D head, okay, so push it down. Put it down point them. This is also a very difficult step before it correctly to fly very well. You see what I have helped. That’S the string that size of the triangle shape is very long okay, so this is really good for now. Okay, after you finish, everything make sure that the panels with the panels are going up a little bit and the winds are flat. Okay – and you need to fix this, so it’s flat. Okay and now we need to create elevators that will help the plane fly up, see this probably the bar you pull or just fold up like this. Let’S just do the same thing for the other side, so this is public. Alright, so the tie phony completed, you can check it out now and if it flies very well for you, please give my video a thumb up share with your friend and let me comment and thank you for watching, see you next time bye, bye, alright. So this is the Eurofighter and I will show you guys at fly. Okay, make sure that your gradient elevators enter up at ten to thirty degrees. You

As found on YouTube